Programmable bipolar stepper motor controller
Programmable stepper motor controller with microstepping of 1, 1/2, 1/4 and 1/8 step
| Operating Voltage | 24V D/C | Tough and very useful 24 Volt relay PCB. |
| Contact Rating | 8A | Screw down terminals for easy use and a |
| Dimensions | 25 x 28 mm | powerful 8 Amp double pole relay fitted with |
| Part Number | RL8A-24 | a diode |
| Operating Voltage | 12V D/C | Tough and very useful 12 Volt relay PCB. |
| Contact Rating | 8A | Screw down terminals for easy use and a |
| Dimensions | 25 x 28 mm | powerful 8 Amp double pole relay fitted with |
| Part Number | RL8A-12 | a diode. |
| Input Voltage | 15V to 35V A/C or D/C | Relay and regulator PCB with a bridge |
| Contact Rating | 3A @ 24V D/C | rectifier and 470uF smoothing cap feeding |
| Dimensions | 25 x 28 mm | into a 78 series regulator with heatsink. |
| Part Number | RR-24 | Fitted with a relay for easy interfacing. |
| Input Voltage | 15V to 35V A/C or D/C | Relay and regulator PCB with a bridge |
| Contact Rating | 3A @ 24V D/C | rectifier and 470uF smoothing cap feeding |
| Dimensions | 25 x 28 mm | into a 78 series regulator with heatsink. |
| Part Number | RR-12 | Fitted with a relay for easy interfacing. |
| Operating Voltage | 24V D/C | Great little PCB for when you need to connect |
| Contact Rating | 3A | noisy contacts to create a latch on/latch off relay |
| Dimensions | 25 x 28 mm | output. |
| Part Number | ELTCH-24 |
| Operating Voltage | 12V D/C | Great little PCB for when you need to connect |
| Contact Rating | 1A | noisy contacts to create a latch on/latch off relay |
| Dimensions | 25 x 28 mm | output. |
| Part Number | ELTCH-12 |
| Operating Voltage | 12V or 24V D/C | You can set the delay after trigger for both |
| Contact Rating | 3A @ 30V D/C | relays and also the on time for both channels. |
| Dimensions | 25 x 28 mm | The most versatile and precise delay timer you |
| Part Number | ETMR2-B | will ever see. Crystal oscillator for accuracy.. |
| Operating Voltage | 7.5V to 28V D/C | Select the relay on time for both channels and |
| Contact Rating | 3A @ 30V D/C | the delay between relay 1 and relay 2. |
| Dimensions | 25 x 28 mm | Pushbutton operation, no pots to adjust means |
| Part Number | ETMR2 | this PCB is very accurate. |
| R.F. Frequency | 434.075 Mhz | 2 Channel radio receiver module. 2 relay outputs with |
| Power Supply | 9V to 26V D/C | N/O and N/C contacts. Low power consumption. |
| Dimensions | 25 x 28 mm | Outputs can be selected individually for momentary or |
| Part Number | ERX-2 | latching. Extremely high quality licence exempt receiver. |
| R.F. Frequency | 434.075 Mhz | Licence exempt radio transmitter with 6 coded |
| Power Supply | 9V to 26V D/C | channels. Very reliable and extremely powerful. |
| Dimensions | 25 x 28 mm | The highest power available without requiring |
| Part Number | ETRX-6 | a licence. Up to 1KM when used with ERX-2. |
| Drive Current | 2 Amps | Quite simply the best stepper motor controller on the |
| Power Supply | 9V to 26V D/C | market by far. 2 amps per channel, programmable |
| Dimensions | 25 x 28 mm | modes and the easy to use interface. Just connect |
| Part Number | ESMC-04 | switches, motor and power. |
| Drive Current | 2 Amps | Easy to connect. Robust and reliable stepper |
| Power Supply | 7.5V to 24V D/C | motor driver with screw contacts for the motor |
| Dimensions | 25 x 28 mm | and power connections. Additional driver |
| Part Number | ESMC-03 | protection via schottky diodes. |
| Drive Current | 750mA |
One of the most versatile stepper motor |
| Power Supply | 7V to 24V | controller PCBs on the market. Featuring our |
| Dimensions | 30 x 32 mm | easy-to-use interface, the ESMC-02 is perfect |
| Part Number | ESMC-02 | for auto-indexing applications. |
| Drive Current | 750mA | A simple programmable 750mA stepper motor |
| Power Supply | 7.5V to 24V D/C | controller. Ideal for home automation, models |
| Dimensions | 25 x 28 mm | and experimentation. Our simplest stepper motor |
| Part Number | ESMC-01 | controller. Robust and very easy to use. |
|
|
In stock: 4 |
PRICE = £32.00 |
|
|
In stock: 11 |
PRICE = £40.00 |
|
|
In stock: 15 |
PRICE = £8.50 |
|
|
In stock 18 |
PRICE = £8.50 |
|
|
In stock: 22 |
PRICE = £9.00 |
|
|
In stock: 20 |
PRICE = £9.00 |
|
|
In stock: 27 |
PRICE = £22.00 |
|
|
In stock: 28 |
PRICE = £22.00 |
|
|
In stock: 3 |
PRICE = £43.00 |
|
|
In stock: 0 |
PRICE = £36.00 |
|
|
In stock: 0 |
PRICE = £52.00 |
|
|
In stock: 0 |
PRICE = £51.00 |
|
|
In stock: 5 |
PRICE = £52.00 |
|
|
In Stock: 0 |
PRICE = £38.00 |
| Drive Current | 1 Amp | Versatile stepper motor to suit many applications |
| Coil resistance | 6.2 Ohms | from CNC milling to robotics and automation. |
| Step angle | 1.8 º full step | 8 leads allow a variety of connection options. |
| Part Number | MY702 | Rare earth permanent magnet unit for high torque. |
|
|
In stock: 18 |
PRICE = £38.00 |
There is no minimum order value. All prices are inclusive of VAT at 20 %
